CAN WE HELP YOU WITH…

PRINT READY ARTWORK

Read this page. It’s really useful!

THREE MAIN THINGS TO BEAR IN MIND WHEN CREATING PRINT-READY ARTWORK…

Three main things to bear in mind when creating print-ready artwork…

Does your document contain crop marks?

Did you include bleed?

Is all your important content away from the edges in the safe zone?

Crop Marks

Crop marks (also known as trim marks) are used to show the required print size of your document. Like many commercial printers, we print on large sheets of paper which are cut down to the required size once printed. Crop marks show where the file is to be cut, for a neat and professional finish.

Bleed

The term ‘bleed’ refers to the area around the outside edge of the artwork. It’s essentially a small area of overprint that gets cut off in the trimming process once the file is printed. Generally, the industry standard is 3mm bleed. This additional 3mm of print extends outside the crop marks on each edge.  Bleed ensures the neatest finish when the printing is cut to size.

Safe Zone

The safe zone is the main area within the file dimensions for your main content. It’s effectively an inner margin to ensure that important information such as text and logos don’t get too close to the edges. We advise keeping important content at least 5mm all edges in your ‘safe zone’ to prevent important design elements being trimmed.

Having trouble?

If your software allows it, add bleed when you first setup your artwork file. Bleed can vary for different products, but it’s generally 3mm.

If your software does not have an option for adding bleed, there is a workaround. Simply add 6mm to the length and 6mm to the width of your print file. For example:

A4 print size = 210mm x 297mm.
Including bleed = 216mm x 303mm

A5 print size = 148.5 x 210mm.
Including bleed = 153.5mm x 216mm

You must then insure that all your important content, such as logos and wording, are kept well away from the edges; 3mm bleed + 5mm safe margin = 8mm margin.

Keep any important content such as text and logos at least 8mm from your file edges. Extend your background colours and design elements to cover the file dimensions. 3mm of these elements will be cropped from each edge once printed.

If you are unsure about creating your print-ready file, feel free to ask so we can help. We’re happy to give advice before printing your file.  We also offer a file-assist service, so if you’d rather leave it to us, please ask.

Example of print-ready file, showing crop marks inside the bleed area. All important content is well away from the edges. The background colour will be trimmed to achieve a neat finish.

STICKER GUIDELINES

When sending us your sticker artwork please provide a single sticker and use these guidelines:

Bleed & Crop Marks

Supply a single sticker, to size, with 3mm bleed and crop marks.

Minimum Font Size - 8pt

Generally, keep text at 8pt or higher so its easy to read.

Minimum Stroke - 0.5pt

Sharp lines should be kept at 0.5pt or thicker.

RESOLUTION

WEB vs PRINT

Screen resolution is measured in PPI (pixels per inch). Print resolution is measured in DPI (dots per inch), Both terms are often used interchangeably.

Most monitors/screens display pixels in a fixed resolution, typically 72 – 100 ppi. Any image optimized for that resolution looks fully detailed and natural to the human eye.

But, if that same image is printed at full size, its pixel blockiness becomes obvious. Images created for online media such as websites have generally been compressed greatly to reduce their file size. This compression can make them look very blurry / pixelated if printed.

SIZE MATTERS

For professional print graphics, 300 dpi is standard. If you want to use a web image for print purposes, you’ll generally run into problems with print quality. The original image just isn’t up to the job and there’s not a lot that the printer can do. You really need access to the original artwork / image (rather than the online version) or you may need to consider re-creating it.

If you have a choice of image sizes at your disposal when selecting it for print (such as from an image library or stock photo website) it’s best to go for the largest image you can get. Reducing an image will not cause quality issues, but enlarging an image may problematic, depending on the image and the scale required. Think “bigger is better”.

Get the most from digital

Artwork Tips

There are a few things to consider when creating artwork for a digital printer.  To ensure you get the best print results, here’s some handy tips:

Total ink limits

Avoid using colours with a total ink limit over 275%. Any colours exceeding this will be re-mapped to their nearest equivalent so there may be a noticeable shift.

Design elements

Large areas of flat colour can be problematic, resulting in an uneven solid that can look banded. A large area is defined as larger than 40mm square. Consider adding a pattern or texture.

Using grey

To achieve neutral shades of grey use black only. Best to avoid using grey tints below 20% or over 80%. Large areas of grey look best with a pattern or texture. Greys that are multi channel have a tendency to print unevenly and can have a yellow cast to them.

Gradients and blends

Gradients look best with a slight texture or a low amount of noise to ensure a smoother transition from light to dark. Alternatively, limit blends to less than a 50% tint change. Grey tints are less forgiving than other colours. You’ll get better results if you create your blends in a raster based application such as Photoshop.

Images and scans

Bear in mind that any minor imperfections in images such as specs or scratches may be more obvious due to the difference in technology.

Front-to-back registration

There may be some movement between the front and back of the sheet. This is due to paper stress. A movement of up to 2mm is considered to be within tolerance, hence the importance of bleed.

Need help with your artwork?

If you are unsure that your artwork is set up correctly, we’re happy to take a look and offer advice prior to printing.

Get in touch using the form below or email your files to design@melbourneprint.co.uk

GET IN TOUCH

Tell us what you need and lets see if we can help.
Fill in the form or call us on 01332 864990 to have a chat.